Makin' Cables, part 3

Boy, I have never gotten so sore, or sick of making cables. The good news is I am almost done. The front was a cabling nightmare, routing stuff between the various HV components, both there and soon to be there. Here is a picture of most stuff laid out:Notice the batteries are in and the power brake booster has tubing! Also note the two main HV posts along the back wall. I found this was necessary to keep things in order, and also separating them by a significant amount made good safety sense.

I also cabled up the motor as much as I could, but suffered a (hopefully) minor setback with one of the motor bolts shearing. Ack! Hopefully I can replace the bolt or figure a workaround without taking the motor out!